Installing the batteries

Yozh is powered by one or two 18650 Li-Ion batteries, inserted in the battery compartment inside the robot; to access it, you need to remove the top plate.

Warning: Li-Ion batteries can be dangerous if not handled right! please make sure to place them with correct polarity. Always turn the power switch off before removing the top plate, replacing the battery, or doing any other work on the robot.

For most purposes, it suffices to use one battery; place it in the slot closest to the back of the robot (of course, power switch should be off while you are doing it). Make sure to observe correct polarity as labeled on the PCB!

See section Power in Yozh Features in Detail document for suggestions on choosing the best 18650 battery or proper method of installation if you want to use two batteries – there are some precautions to be observed!